SIRAX BT5400
Transducers for power, phase angle, and power factor
- Connection type single-phase; or 3-phase 3-wire balanced or unbalanced; or 3-phase 4-wire balanced or unbalanced
- Measuring input for power
- Rated voltage up to 500 V, rated current 1/5 A
- 2 configurable analog outputs, linear or with a kink and one unipolar range from 0…20 mA/4…20 mA or 0…10 V, or bipolar from -20…0 mA or -10…0…+10 V
- Rapid on-site programming by means of pushbuttons or via software
- Simple on-site instrument operation
- Clear and easy-to-read display of measured data on LCD display
- Flexible communication and remote read-out via integrated Modbus-RTU interface
- DIN top-hat rail mounting
- Basic accuracy 0.2%, basic accuracy phase angle, power factor 0.5%
The SIRAX BT5400 is used to measure and convert active, apparent, reactive power, phase angle & power factor of a single phase or 3-phase AC system with balanced or unbalanced load into an proportional DC current or voltage output signal.
- Connection type: One-phase, 3-phase 3-wire balanced or unbalanced load or 3-phase 4-wire balanced or unbalanced load
- Measuring input for power
- Nominal voltage up to 500 V, nominal current 1 / 5 A
- 2 configurable analog outputs linear or kinked in a unipolar range of 0…20 mA / 4…20 mA or 0…10 V or a
- bipolar range of -20…0 mA or -10…0…+10 V
- Quick on-site programming using push buttons or via CB-Configurator software
- Simple on-site device operation
- Clear and well readable representation of measured data via LCD display
- Flexible communication and remote readout via integrated Modbus RTU interface
- DIN rail for top-hat rail mounting
